PCIE TO M 2(M KEY+B KEY)

PCIE TO M 2(M KEY+B KEY) - TXB044

2-Port M.2 SSD (NGFF) Adapter Card - 1 x PCIe 

(NVMe) M.2, 1 x SATA III M.2 - PCIe 3.0

This 2-Port M.2 SSD Adapter card is one of the only Cards that Supports both PCIe and SATA-based M.2 SSDs

Increase The Storage Of Your Desktop PC

This Card Provides a Platform for Adding up to Two M.2 SSDs To Virtually any Computer That has A PCIe Slot

It Supports common M.2 SATA SSDs, as well as newer High-Performance M.2 PCIe Drives

Now you have a simple and effective way to Expand the Storage of your Computer, regardless of the M.2 Drive Types you are using

Optimize Your Computer’s Performance

When you Couple this Card with a PCI Express based M.2 Drive

You can give your Computers Performance a noticeable Speed Boost

With Support for PCI Express 3.0 (up to approximately 40Gbps)

You can Install the latest High-Performance M.2 PCIe SSDs inside your Computer

With Faster Performance, you can get more work done in less time

Supports A Wide Range Of Drives 

You can rest assured that your M.2 SSDs are Compatible with the Adapter Card

It Supports the most common Drive sizes, including 2280, 2260, 2242 and 2230

Features

Expand the Storage and improve the Performance of your Computer with Slots for one M.2 SATA SSDs and one M.2 PCIe SSD

Supports PCI Express 3.0 (x4), ideal for a High-Performance M.2 PCIe SSD (NVMe)

SATA Slot Feature a pass-through Design, so your Drive can Connect to the SATA Port on your Host PC

Full Bandwidth is available for each M.2 Drive simultaneously (up to approximately 40Gbps for M.2 PCIe Drive, and up to 6Gbps for M.2 SATA III Drive)

Wide Installation Compatibility, with Support for a range of M.2 drives (2280, 2260, 2242, 2230)

Adjustable stand-offs and Multiple Mounting Holes Support 80mm, 60mm, 42mm, and 30mm SSDs

Equipped With A Full-Profile Bracket, Includes A Low-Profile (half-height bracket) For Installation In Small Form-Factor Computers

Installs into x4, x8, or x16 PCIe Slots

Data Sheet Hardware 

Bus Type:  PCI Express

Card Type: Standard & Low Profile

Industry Standards

Serial ATA 3.0 Specification – SATA I/II/III (1.5/3/6Gbps)

PCI Express Base Specification Rev. 3.0

Interface

M.2 SATA

SATA M.2 PCIe

Port Style:  Integrated on Card

Ports: 2

Performance 

ATAPI Support: Yes

Bootable: Yes

Connector(s)

Connector Type(s): 1 - PCI Express x4 Male

Internal Ports 

1 – M.2 SATA (NGFF, B-Key) Receptacle

1 – M.2 (NGFF, M-Key, PCIe x4) Receptacle

1 – SATA (7 pin, Data) Plug

Software 

OS: Compatibility OS Independent, no additional Drivers or Software required

Special Notes / Requirements

Note

The Maximum throughput of this Card is limited by the Bus Interface

If used with PCI Express Gen 1.0 enabled Computers, the Max throughput is 2.5 Gbps

If used with PCI Express Gen 2.0 enabled Computers, the Max throughput is 5 Gbps

System and Cable Requirements 

PCI Express enabled Computer with an available PCI Express x4, x8, or x16 Slot

One SATA Host Port on the Host Controller

An OS that natively Supports PCIe SSDs (NVMe)

Windows 7 and later

Mac OS X 10.10.3 and later

Indicators 

LED Indicators: 2 – M.2 Drive Status/Activity (Green)

Environmental 

Humidity: 20-80% RH

Operating Temperature : 5C to 50C (41F to 122F)

Storage Temperature: -25C to 70C (-13F to 158F)

Physical Characteristics

Product Height: 120 mm

Product Length: 140 mm

Product Weight:51.2 g

Product Width: 20 mm

What's In The Box

Included in Package 

1 – 2-Port M.2 NGFF SSD Adapter Card

2 – M.2 Mounting Standoffs

2 – M.2 Mounting Screws